基于人工神经网络的智能化架空线路应变快速解调方法北大核心

为了提高智能化光纤复合架空线路态势感知的实时性,将人工神经网络方法应用于光纤沿线应变解调,确定了神经网络的结构。编程实现了基于洛伦兹模型的最小二乘谱拟合方法和神经网络方法,采用不同信噪比和布里渊频移的布里渊谱训练神经网络,将它们应用于某光纤复合架空线路沿线光纤应变的测量,从不同角度比较了两种方法的计算结果。计算结果表明,神经网络方法能有效获得光纤沿线的布里渊频移进而获得应变,具有与谱拟合方法相似的准确性,但应变解调时间仅约为谱拟合方法的1/20000。研究结果为提高智能光纤复合架空线路态势感知的实时性提供了参考。     

智能假肢膝关节的研发要点及其研究进展综述

目的 介绍国内外智能假肢膝关节研究的主要进展,为相关领域的研发提供可借鉴的思路.方法 基于机械结构、调控方式、驱动方式,对典型假肢膝关节进行了分类比较,并从假肢穿戴者的运动意图识别、驱动控制、人机协调控制等方面做了分析.此外,对假肢膝关节在智能化研究与安全性、个性化与通用性、人机共融技术、科学伦理、关键技术等方面需要注意的问题,提出了研发要点和技术思路.结论 智能假肢膝关节应注重安全性与稳定性,规避用户在使用过程中的潜在危险因素;实现假肢控制参数的自整定和灵活适配,在个性化与通用性上达到平衡;综合考虑人—机—环境因素,实现协调控制;坚持"以人为本",在技术方法和科学伦理两个方面开展医工结合的研究;突破关键技术限制,建立完善的社会医疗康复保障服务体系.     

混菌矿化增强再生粗骨料的物理力学性能

为克服单一微生物培养成本高且矿化鲁棒性不足的缺陷，提出了一种混菌矿化增强再生粗骨料物理力学性能的方法.通过筛选矿化效率较高的好氧嗜碱混菌，考察了混菌矿化对再生粗骨料物理力学性能和混凝土抗压强度的影响.结果表明：相同增强时间下，混菌比纯菌呈现出更优异的矿化增强效果；随着混菌矿化增强时间的延长，再生粗骨料吸水率和压碎指标呈现出先减小后增大的趋势，最优增强时间为15 d；采用矿化增强再生粗骨料制备的再生混凝土抗压强度提高幅度达到22.1%.     

基于特征建模的TDD系统大气波导干扰控制体系研究

大气波导干扰是特定气象条件下发生的时分双工（time-division duplex，TDD）系统内干扰，是TDD移动通信系统大规模组网面临的顽疾。在总结分析大气波导干扰成因和分类等的基础上，对大气波导干扰进行建模和表征，验证了海量干扰源在时域和频域的功率集总特征，并结合大量4G/5G现网实测数据给出了典型条件下内陆波导和海面波导的量化干扰信号传播模型，对于干扰的预测和预防具有重要意义。基于干扰特征，给出了TDD系统预防大气波导干扰的帧结构与组网的4项设计原则，5G现网数据表明干扰控制方案有效，上行干扰下降10 dB以上，相关原则对于6G系统的设计也具有指导意义。     

调控Al2O3晶型控制MgAl2O4:Mn4+荧光粉中Mn价态研究

Mn⁴⁺激活红光荧光粉是白光半导体发光二极管(wLEDs)领域当前研究热点之一。Mn⁴⁺离子²E→⁴A₂跃迁在铝酸盐中的最短发光波长是在MgAl₂O₄中实现的651 nm发光, 由于其结构中含有形成四面体或八面体配位的两种阳离子格位(Mg²⁺/Al³⁺), 易造成所掺杂锰元素存在多种价态(+2/+4/+3等)。本研究通过改变起始原料中Al₂O₃的晶型(γ/α比例)及退火处理来调控锰离子在MgAl₂O₄晶格中的占据格位, 对其主要存在价态实现调控。采用荧光光谱和紫外-可见-近红外漫反射光谱技术来表征所合成荧光粉中Mn离子的价态及其演变。研究发现, 高α/(α+γ)比铝源促进Mn²⁺形成, 而低α/(α+γ)比铝源促进Mn⁴⁺形成。通过使用高活性纳米γ-Al₂O₃为铝源, 有效抑制了锰离子在MgAl₂O₄中Mg²⁺格位的占据及Mn²⁺离子的形成, 经空气中1550 ℃保温5 h的一次高温热处理即可制备出在可见光区只有Mn⁴⁺红光发光的高纯高亮度MgAl₂O₄:Mn⁴⁺荧光粉。氧化铝晶型影响锰离子掺杂格位和掺杂价态的本质规律是: 氧化铝活性决定实际固溶掺杂反应步骤, 进而影响锰离子掺杂格位和价态。本研究提出的反应步骤调控作为反应气氛、电荷补偿剂、反应温度三种调控方法外的一种新方法, 为Mn⁴⁺激活铝酸盐荧光粉中锰离子掺杂价态调控提供了新思路。     

可重构智能表面辅助的四元数调制无线通信系统

四元数调制(Quaternion Modulation,QMod)是一种新型高传输速率的极化调制(Polarized Modulation,PMod)技术,是未来卫星通信系统中极具潜力的多元调制方案之一。QMod将数据块分成4块,其中两块是传输数据信号,另外两块则映射到极化状态部分。每个极化状态块均有一位比特,那么它们可以产生4个极化状态组合。这些状态组合可以用来确定传输数据块在四元数4个不同维度中的位置,从而获得两位额外的传输比特。相比于传统的PMod技术,QMod有着更高的频谱效率。为了进一步挖掘QMod的潜力,介绍了由可重构智能表面(Reconfigurable Intelligent Surface,RIS)辅助的QMod系统,同时推导了该系统的平均误码率理论上界,并在瑞利信道下进行了BER性能仿真。仿真结果表明,RIS辅助的PMod或者QMod系统即便在较低的SNR情况下仍有良好的BER性能,并且随着RIS单元数的增多,其BER性能会逐步提升。     

A robust model-free controller for a three-phase grid-connected photovoltaic system based on ultra-local model

In this paper, a robust model-free controller for a grid-connected photovoltaic (PV) system is designed. The system consists of a PV generator connected to a three-phase grid by a DC/AC converter. The control objectives of the overall system are to extract maximum power from the PV source, to control reactive power exchange and to improve the quality of the current injected into the grid. The model-free control technique is based on the use of an ultra-local model instead of the dynamic model of the overall system. The local model is continuously updated based on a numerical differentiator using only the input–output behavior of the controlled system. The model-free controller consists of a classical feedback controller and a compensator for the effects of internal parameter changes and external disturbances. Simulation results illustrate the efficiency of the controller for grid-connected PV systems.     

BCLA CLEAR - Effect of contact lens materials and designs on the anatomy and physiology of the eye

This paper outlines changes to the ocular surface caused by contact lenses and their degree of clinical significance. Substantial research and development to improve oxygen permeability of rigid and soft contact lenses has meant that in many countries the issues caused by hypoxia to the ocular surface have largely been negated. The ability of contact lenses to change the axial growth characteristics of the globe is being utilised to help reduce the myopia pandemic and several studies and meta-analyses have shown that wearing orthokeratology lenses or soft multifocal contact lenses can reduce axial length growth (and hence myopia).However, effects on blinking, ptosis, the function of Meibomian glands, fluorescein and lissamine green staining of the conjunctiva and cornea, production of lid-parallel conjunctival folds and lid wiper epitheliopathy have received less research attention. Contact lens wear produces a subclinical inflammatory response manifested by increases in the number of dendritiform cells in the conjunctiva, cornea and limbus. Papillary conjunctivitis is also a complication of all types of contact lenses. Changes to wear schedule (daily disposable from overnight wear) or lens materials (hydrogel from SiHy) can reduce papillary conjunctivitis, but the effect of such changes on dendritic cell migration needs further study. These changes may be associated with decreased comfort but confirmatory studies are needed. Contact lenses can affect the sensitivity of the ocular surface to mechanical stimulation, but whether these changes affect comfort requires further investigation.In conclusion, there have been changes to lens materials, design and wear schedules over the past 20+ years that have improved their safety and seen the development of lenses that can reduce the myopia development. However, several changes to the ocular surface still occur and warrant further research effort in order to optimise the lens wearing experience.     

浅议生态环境监测机构的风险控制

现阶段,为了探索创新性的发展途径,生态环境监测机构应始终增强风险控制意识。应加强风险管理,立足于风险控制,以求不断健康发展。